Item : 0  Total : 0.00
 
Home  |  About Us  |  Sitemap  |  Contact us  |  Login  |  Register
VOIP Phone 
IP-Camera 
SKIP2PBX 
Asterisk PBX 
WIFI phones 
 
New Products |  Specials |  Request for Quote |  Track Your Order |  RMA
Sangoma > Sangoma SANGOMA > Sangoma A102
Part No : cy-A102

Sangoma A102

<%=group_title%>
Our Price
:
$ 861.99
List Price
:
$ 1,000.99
In Stock
:
0
This Item is Discontinued
 
 
Have you seen a lower price? Click Here
 
Sangoma A102 is the dual port version of Sangomas family of Advanced, Flexible Telecommunications (AFT) hardware designed for optimum support of voice and data over T1, E1 and J1.

The Sangoma A102 is next generation hardware designed for optimum support of data and voice over T1 and E1. Part of Sangoma award-winning Advanced Flexible Telecommunications product line, the Sangoma A102 uses the same high-performance PCI or PCI Express interface that providing superior performance in critical systems all over the world. The Sangoma A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines.

The Sangoma A102 card features two ports of optimized voice and data over T1, E1, and JI available with Telco-grade hardware echo cancellation (see Sangoma A102D).

 
Features

Sangoma A102 Optional DSP Hardware

  • G.168 2002 echo cancellation in hardware
  • 1024 taps/128 ms tail per channel on all channel densities
  • DTMF decoding and tone recognition
  • Voice quality enhancement: music protection, acoustic echo control, and adaptive noise reduction
  • Sangoma A102 Does not increase the physical size of the card, and no additional slot is required

Sangoma A102 Operating Systems

  • Windows 2003, Windows XP, Windows Server 2008, Windows Vista
  • Linux (all versions, releases and distributions from 1.0 up)

Sangoma A102 T1/E1 Status Alarms

  • RED: Telco Red Alarm Condition
  • OOF: Out of Frame
  • LOS: Receive Loss of Signal
  • AIS: Alarm Indication Signal
  • RAI: Remote Alarm Indication (Yellow Alarm)

Sangoma A102 Line Protocols

Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC

Sangoma A102 Higher Level Protocols

IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE, PPPoA, IP over






 
More About Sangoma A102

Sangoma A102 Digital Telephony Card Overview

The Sangoma A102 is next generation hardware designed for optimum support of data and voice over T1 and E1. Part of Sangoma award-winning Advanced Flexible Telecommunications product line, the Sangoma A102 uses the same high-performance PCI or PCI Express interface that providing superior performance in critical systems all over the world. The  Sangoma A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines.

Take advantage of hardware and software improvements, as soon as they become available. Like all cards in Sangoma AFT family, the Sangoma A102 is field upgradable with crash-proof firmware.

Sangoma A102 Features and Functions

    * Sangoma A102 Dual  T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
    * Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously.
    * Sangoma A102 Support for Asterisk, Yate, CallWeaver and FreeSWITCH  PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications.
    * All of Sangomas AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards - proper PCI-standard interrupt sharing without manual tuning.
    * Sangoma A102 Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
    * Sangoma A102 Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
    * Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
    * Autosense compatibility with 5V and 3.3V PCI busses.
    * Line decoding: HDB3, AMI, B8ZS.
    * Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japans J1.
    * A102E and A102DE PCI Express: 1 Lane PCI Express bus.
    * Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
    * 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
    * Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
    * Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
    * Sangoma A102 T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
    * Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.


People who shopped for the Sangoma A102 also shopping for these

Sangoma A301 Sangoma A301
$1,506.99
Sangoma A108 Octal (8 Port) Sangoma A108 Octal (8 Port)
$2,416.99
Sangoma A101 Sangoma A101
$516.99
Sangoma ADSL PCI Controller Sangoma ADSL PCI Controller
$149.99
Sangoma A400 Analog voice card Sangoma A400 Analog voice card
$299.99