Sangoma A101 is part of Sangoma family of Advanced Flexible Telecommunications hardware product line, Sangoma A101 uses the same high-performance PCI or PCI Express interface that is providing superior performance in critical systems all over the world.
The Sangoma A101 supports up to 2.048 Mbps of full duplex data through-put or up to 30 voice calls over a single T1, E1, or J1 line.
With Sangoma A101 cards, you can always take advantage of hardware and software improvements, as soon as they become available. The Sangoma A101, like all cards in Sangomas AFT family, is field upgradeable with crash proof firmware.
Choose the Sangoma A101 and sangoma A101DE cards with Octasic DSP hardware and certified algorithms to achieve carrier-grade echo cancellation and Voice Quality Enhancement functions on your open source or even proprietary telephone system.
IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex
G), BSC over X.25, SNA over
X.25, PPPoE, PPPoA
More About Sangoma A101
Sangoma A101 Technical specification:
One T1/E1
port with optimum PCI
or PCI-Express interface for high performance voice and data applications
Sangoma A101 T1/E1 Support for Asterisk, FreeSwitch, and Yate as well as other Open Source and
proprietary PBX,
Switch, IVR, and VoIP gateway applications
All of Sangoma is AFT products use the same base PCI interface card. Fully
compatible with all commercially available motherboards???proper
PCI-standard interrupt sharing without manual tuning
Dimensions: 2U Form factor: 120 mm x 55 mm for use in
restricted chassis. Includes high-quality, tested RJ45 cables and short 2U
mounting clips for installation in 2U rack-mount servers
Sangoma A101 T1/E1Includes
high-quality, tested RJ45 cables and short 2U mounting clips for
installation in 2U rack-mount servers
Intelligent hardware:
Downloadable FPGA
programming with multiple operating modes. Add new features related to
voice and/or data when they become available
Autosense compatibility with
5 V and 3.3 V PCI busses
Line decoding: HDB3, AMI, B8ZS
Framing: CRC-4, Non CRC4,
ESF, SF, D4. Also compatible with Japan's
J1
A101E and A101DE PCI Express: 1 Lane PCI Express bus
Maximum operational power for
PCI: 3 W (0.6 A @ 5 V)
For PCI Express: 2.5 W
(0.76 A @ 3.3 V)
Temperature range: 0
50 ??C
32-bit bus master DMA data
exchanges across PCI
interface at 132 Mbytes/sec for minimum host processor intervention
Ring buffer DMA handling for
minimum host intervention and guaranteed data integrity on high volume
systems
Sangoma A101 T1/E1 Supports Robbed Bit
Channel Associated Signaling (CAS) and ISDN PRI
Sangoma A101 T1/E1 and fractional T1/E1, multiple channel HDLC
per line for mixed data/TDM
voice applications
Sangoma A101 T1/E1 is Optimized
per channel DMA streams and hardware-level HDLC handling unload the host
CPU
People who shopped for the Sangoma A101 also shopping for these
