Soho-voip-phone: Your One Shop Source for Voip Products & Services
Item : 0  Total : 0.00
 
Home  |  About Us  |  Sitemap  |  Contact us  |  Login  |  Register
VOIP Phone 
IP-Camera 
SKIP2PBX 
Asterisk PBX 
WIFI phones 
 
New Products |  Specials |  Request for Quote |  Track Your Order |  RMA
cylogistics > cylogistics SANGOMA > A301 Clear Channel T3/E3 card
Part No : CY-A301

A301 Clear Channel T3/E3 card

Our Price
:
$ 1,325.99
List Price
:
$ 2,347.99
In Stock
:
10
Quantity   : 
 
 
Have you seen a lower price? Click Here
 
The A301 card is a 2U PCI adapter that supports clear channel T3 (44.7 Mbps) and E3 (34.4 Mbps) over dual BNC connectors.Based on bus mastering PCI technology supported by a ring-buffer DMA architecture, the A301 provides 132 Mbps of PCI bus transfer capacity with minimal real-time processor load.The A301 is ideal for larger organizations or ISPs that have outgrown their multiple T1 or DSL links. The A301 allows these users to take advantage of the relatively low cost of T3/E3 connections when compared to multiple T1 or E1 lines.
 
Features
Intelligent battery monitoring and reminding
High rated automatic static bypass switch for overloads and short circuits protection
High in-rush handling capability to turn on with load on
Easy-to-read LCD display shows real-time operating parameters and system flow chart
Direct readout of voltage, Hz, battery and load level
Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
Autosense compatibility with 5v and 3.3v PCI busses
Advanced IGBT inverter with pure sine wave output
32 bit bus master DMA data exchanges across PCI interface
132Mbytes/sec for minimum host processor intervention

Technical Specifications
  • Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
  • 32 bit bus master DMA data exchanges across PCI interface at
  • 132Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Allows new features to be added when they become available.
  • Power: 800mA peak, operational 300mA max at +3.3v or 5v.
  • Autosense compatibility with 5v and 3.3v PCI busses.
  • Temperature range: 0 - 50C.

 
Specifications
T3/E3 Standards

* DS3/E3 Framer: ANSI T1.107_1988, ANSI T1.107_1989, T1.404, ITU-T G.751,
* ITU-T G.832, Bellcore TR-TSY-000009 and AT&T Pub 54014.
* LIU Receiver: G.775, GR-449, ITU G.751, ITU G.752, ITU G.755, ETSI TBR 24, and GR-499-CORE, 1995.
* LIU Transmitter: Bellcore GR-499, GR-253 and ANSI T1.102.
* Jitter Attenuator: T1.105.03b, ETSI TBR-24, Bellcore GR-253 and GR-499.

Line protocols
ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.

Operating systems
Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD.

Higher level protocols
IP/IPX over Frame Relay/ PPP/ HDLC/ X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.