|
|
|
|
|
CPE2000 from Minuteman is a 1000 VA On-line UPS with 6 outlets that offers on-line technology and a wide input voltage range to provide a constant clean, steady sine wave to protected equipment, even without going to battery mode. It can instantly switch to battery, and its battery management system and easy, swappable battery packs make maintenance trouble free. CPE2000 is a sophisticated yet affordable single-phase UPS system. CPE2000 is a 2000VA/1400W 120 VAC true on-line, double-conversion, extended runtime UPS designed for critical, power-sensitive electronic environments.
CPE2000 has a Back-up time -full load: 7.6 minutes and Back-up time - half load: 19.0 minutes. The Back-up runtime information is based on the best estimates. Actual runtime may vary depending upon the power factors of the protected equipment and the condition of the UPS batteries. CPE2000 the user-friendly display clearly communicates the UPS status, and makes diagnostics a trouble-free task. The standard communications software allows for easy control and shutdown of the protected equipment during a blackout. CPE2000 also has SNMP adaptability through an optional SNMP card. Optional AS/400 or True Relay Interface cards also give the ability to remotely monitor the UPS using a variety of computing platforms.
|
|
|
|
Features |
|
| - Hot-swappable batteries
- Front panel display with load/battery meter and status indicators
- Independent battery pack chargers to reduce battery recharge times
- Extended runtime using external battery packs
- Output receptacle control for non-critical load shedding capability
- Up to a 0.8 power factor (in watts) for larger capacities
- 3.5-inch (2U) rack/tower case style
- Wallmount installation kit optional
- 23-inch rack or cabinet installation kit optional
- Floor-standing tower, 19-inch rack and cabinet installation kits included
|
|
|
|
|
Specifications |
|
Servers & Networks Telecommunications Equipment Industrial Equipment Medical Imaging Equipment Any Sensitive Electronic Devices Display LED Indicators - Utility, Battery Low, Inverter, Bypass, Test OK, Overload Fault, Load/Battery Level, and System Fault Conditions Display Self Diagnostics - On-Demand Push Button Audible and Visual Alarms - Line Failure, Battery Low, Transfer to Bypass, Overload, System Fault Conditions Physical Tower Net Dimensions (WxHxD, in.) - 5.1 x 14.4 x 18.9 Physical Tower Net Weight (lbs. / kg) - 60 / 27 Operating Temperature - 0o C - 40o C Altitude - 0 to +10,000 ft Humidity - 30 to 90% RH Maximum, Non-condensing Noise - < 45 dB at 1 meter Safety Standard - EN500091-1, UL1778, CSA 22.2 EMC Standard - EN500091-2, EN61000-3-2, EN61000-3-3, FCC Class A |
|
|
|